Monday, January 30, 2017

5 Common Mistakes That Cause Falls on the Job

Falls on construction jobs are the leading cause of death, with nearly 300 fatalities in 2013. While some accidents are unavoidable, many falls result from mistakes that could have been prevented which only adds to the tragedy. Being aware of the common mistakes that cause falls on the job can go a long way toward making the workplace safer.

Incorrect Equipment

Incorrect equipment takes on several fronts. It could involve equipment that is inappropriate for certain tasks. Body belts, for example, can help you get into proper position and prevent falls. However, they offer no protection if one occurs.

If the potential for a fall exists, it is imperative to use a full body harness. If you work at heights of six feet or greater, you’ll need a Personal Fall Arrest System (PFAS). It consists of a full body harness, lanyard/lifeline, and secure anchor points.

All components are necessary to protect you from the risk of a fall as well as its impact if one occurs. When used properly, it could save your life or that of a co-worker. Likewise, certain jobs require equipment that can handle the particular hazards of some tasks.

Workers who use welding equipment should opt for a body harness that has webbing which is burn resistant and arc-flash protective. A worker who needs to reach sites by climbing should use a harness with a frontal attachment point.

While you’ll find different types of harnesses, connecting devices, and anchor points, that doesn’t mean that these parts are interchangeable. So the mistake of using incorrect equipment also includes not using the right parts in the PFAS. These systems are designed to work in concert with the other components.

Failure to Inspect Equipment

Before using a PFAS, you should inspect all components including the harness, connection, and anchor point. The harness is of particular importance since it will help distribute the force of a fall to reduce the risk of injury that can occur even if you don’t fall.

The impact of a sudden stop can cause serious bodily harm. The Occupational Safety & Health Administration (OSHA) recommends bending 6-inch increments of the belt of the harness and examining it for signs of damage like wear, frays, or cuts. You should also make sure that the rivets are intact and lie flat against the material.

This inspection is essential prior to using a body harness. It may seem unnecessary especially for something that gets frequent use. However, a small tear is much easier to repair than one that has gone undetected. In the meantime, everyone using the same equipment is at risk for a fall because of this avoidable mistake.

Damaged Equipment

Using damaged equipment puts you at a greater risk for a fall. A PFAS can only protect you as well as the integrity of your gear remains intact. Damage from whatever cause represents a weak point that can give way in a critical situation.

Equipment with tears or any other sign of deterioration should be repaired by an authorized service center or destroyed. It’s essential that damaged safety gear is not placed back into general use. That is what makes an inspection of the equipment critical whether it’s before a single use or as part of an annual inspection of safety equipment.

This measure also applies for harnesses that show signs of impact from a damaged fall indicator. These harnesses should never be reused. Store safety equipment in a clean, dry space out of direct sunlight to prevent damage caused by environmental factors.

Along with regular inspections, these simple measures can ensure a safe workplace and prolong the life of a PFAS by keeping it in proper working order and repair.

Improper Use

The best safety equipment does little good to prevent falls if you don’t use it correctly. That means ensuring that a body harness fits properly before going on the job. Your body harness should fit snug, but not too tight to avoid creating pressure points.

You should also adjust your chest strap so that it doesn’t sit too high on your sternum to avoid injury in case of a fall. You should position your back strap so that you don’t sit too far forward or too far back in the harness. Failure to do so could result in you falling out of the harness.

The proper fit will ensure that the force of a fall goes from the D-ring down the back strap to the sub-pelvic straps where your body can best handle the impact of an arrested fall.

Lack of Training

Most accidents can be avoided with proper instruction about the use and care of safety equipment. Your supervisor should instruct all workers how to use the equipment as well as how to recognize the damage that could lead to failure. No one should use a PFAS without training by a competent person. Lack of training also applies if a work site has changed in some way that can affect current fall protection procedures.

If changes are made to the site or your plan, retraining by a component person with proper experience and authority is essential no matter how long everyone has been on the job. However, the training doesn’t stop with equipment use. It should also include a plan for rescue in the event of a fall that has been arrested. While a PFAS will prevent a free fall, a rescue plan is necessary to reduce the risk of suspension trauma caused by an incapacitated worker left in an upright position for too long.

 Often, falls on the job can be prevented by simply using the proper equipment in the right way. That means ensuring it is in good shape without damage that could cause it to fail. It is both the responsibility of the employer to provide training and for the employee to learn all that it entails. Only then can you prevent falls caused by common mistakes.

16 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. Thanks for providing this information. You can visit Fall Protection Training to get trained which will help you to know more about how to avoid these kind of disasters.

    ReplyDelete
  3. The variety of reasons can cause the problems and even some unpleasant consequences in the workplace. Improving the quality of training and timely testing the equipment will help to avoid this.

    ReplyDelete
  4. It seems to be quite stressful and uncomfortable when making certain mistakes. That is why we need to know more about the things we'll have to do in our career path.

    ReplyDelete
  5. Unfortunately, each of us makes mistakes which cause falls. In order to avoid making these mistakes, we need to speak to professionals and read more intriguing articles like this one is.

    ReplyDelete
  6. Great Blog! This post gives a better idea. Thanks for the useful information. I hope you will share some more content. Please keep sharing! Opt for the Multifamily Construction Jobs at constructionprojects.com.

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. I totally agree with this article and I just want to say that this article is a very nice and very informative article.I will make sure to be reading your blog more. Visit us on construction management recruiter

    ReplyDelete
  9. These bridles ought to never be reused. Buy Custom Essay Online Store security gear in a spotless, dry space out of direct daylight to forestall harm brought about by ecological variables.

    ReplyDelete
  10. Hey guys, help write my essay paper ! - Іs best known for helping students with urgent assignments. The service delivers an essay in between three and six hours. If a student needs a paper by the next day, the company’s writers can work on it overnight. So, it will be ready in the morning.

    ReplyDelete
  11. I just want to say that this article is extremely excellent and very educational and that I completely agree with it. I'll be sure to read your blog more often. please check the assignment help uk service to get help with your assignment if you are studying at university I always use this site and that's why I will suggest you use it.

    ReplyDelete

  12. I enjoy what you've the article you've provide here. This type of clever work and job exposure! Keep up the amazing works guys I’ve added you to the list of my visiting back blog. Thanks for sharing. unn jupeb admission

    ReplyDelete
  13. Thanks for sharing such an informative article. As part of a company that offers safety hardware equipment to climbers, I do agree that preventing falls on the job requires a commitment to safety from both employers and employees. By identifying common mistakes and implementing proper safety measures, we can reduce the risk of accidents and improve workplace safety.

    ReplyDelete
  14. Wow, what an amazing blog post! I've always loved the rustic charm of terracotta pot , and your article perfectly captured their beauty. Thank you for sharing such valuable information and inspiring me to incorporate more of these pots into my garden."

    ReplyDelete